| Product |
Softening Point - Wilhelmi Method (manual)
| Main Unit |
10-0071 | Manual Softening-Point Tester, Wilhelmi Method |
|
Bituminous materials: DIN 1996-15
Consisting of: Supplied with: Power supply: 230 V, 50/60 Hz, 800 W, EU-plug |
||
| Options & Accessories |
50-9167 | Bath Liquid, silicon oil AR 200 |
|
1 kg, water clear, heat resistant up to approx. +250 °C,
|
||
50-5315 | Tongs (stainless steel with rubber cover) |
|
![]() | to handle beakers etc. |
|
10-0061 | Thermometer ASTM 15C / IP 60C |
|
Range: -2 to +80 : 0.2 °C
|
||
10-0062 | Thermometer ASTM 15C / IP 60C |
|
Range: -2 to +80 : 0.2 °C (officially certified) |
||
10-0063 | Thermometer ASTM 15F |
|
Range: +30 to +180 : 0.5 °F
|
||
10-0064 | Thermometer ASTM 15F |
|
Range: +30 to +180 : 0.5 °F (officially certified) |
||
10-0065 | Thermometer ASTM 16C / IP 61C |
|
Range: +30 to +200 : 0.5 °C
|
||
10-0066 | Thermometer ASTM 16C / IP 61C |
|
Range: +30 to +200 : 0.5 °C (officially certified) |
||
10-0067 | Thermometer ASTM 16F |
|
Range: +85 to +392 : 1.0 °F
|
||
10-0068 | Thermometer ASTM 16F |
|
Range: +85 to +392 : 1.0 °F (officially certified) |
||
| Spare Parts |
10-0077 | Load Balls (Wilhelmi), steel (Ø 15 mm, 13.9 g), pack of 10 |
|
10-0075 | Ring (Wilhelmi) with bayonet lock |
|
10-0076 | Ring-Holder (Wilhelmi) with rod |
|
10-0106 | Beaker, 1000 ml , borosilicate glass, low shape with spout |
|
10-0057 | Plate, glass, 120 x 120 x 6 mm |
|
11-0138 | Support Board, center hole Ø 50 mm (2") |
|
|
glass ceramics (150 x 150 x 4 mm) |
||
11-0018 | Heater Rod 200 W, 115-230 V |
|
11-0019 | Heating Element with 4 heater rods |
|
|
Power supply: 230 V, 50/60 Hz, 800 W |
||
25-0004 | Control Module "m2" to regulate the heating power |
|
|
Power supply: 230 V, 50/60 Hz |
||
| Order Guideline |
Minimum equipment: |
1x 10-0071 |
Spares (approx. 1 year): |
10-0077, 10-0057, 10-0106, Thermometer |
Additional requirements: |
Bath liquid |




