16-0845

Water Content Determination Apparatus for

Bituminous Materials

DIN 1996-5

Consisting of:
1 round flask (500 ml), standard taper (NS 45)
1 adapter, standard taper (NS 45 to NS 29)
1 glass trap (10 ml), standard taper (NS 29)
1 reflux condenser (400 mm), standard taper (NS 29)

Supplied with:
1 electric heater (800 W), stainless steel housing
1 heating board (center hole Ø 70 mm)
1 support rod (600 mm) with 4 adjustable clamps

Power supply: 230 V, 50/60 Hz

16-1845

Water Content Determination Apparatus for

Bituminous Materials

Like 16-0845 but:
1 Heating Mantle instead of the electric heater

Power supply: 230 V, 50/60 Hz

16-0897

Flask-Adapter, standard taper (NS 45/40 into NS 29/32)

50-7030

Sleeve (NS 45/40), PTFE, reusable

improves the gas, liquid and vacuum tightness; prevents the air-inlet from jamming

50-7050

Sleeve (NS 45/40) with Gripping Ring, PTFE

for multiple use, pack of 10

16-0834

Gas Heating Device

Consisting of:
universal gas burner, wire netting, base plate, rod 750 mm,
2 adjustable clamps 40 mm Ø, 3 boss heads, and ring holder

17-0802

Circulation Air Oven

Consisting of:
thermostatically-controlled, includes of 2-hours & permanent time switch, thermometer for temperature inspection and perforated intermediate bottom.

Important: Not explosion protected!

Technical Data:
Temperature range: +60 to +200 °C
Temperature constancy: +/- 2-3 K
Capacity: 14 l
Inner dimensions (W x H x D): 19 x 20 x 36 cm
Outer dimensions (W x H x D): 31 x 38.5 x 47 cm
Weight: 17 kg

Power supply: 230 V, 50/60 Hz

25-0700

Heating Mantle for flasks up to 500 ml

(for 16-1839, 16-1850, 16-1844, 16-1845)
Power supply: 230 V, 50 Hz

16-0825

Heating Mantle for flasks up to 2000 ml

(max. Ø 166 mm) with support ring
Power supply: 230 V, 50 Hz

16-0824

Support Stand

Consisting of:
base plate, rod 750 mm, 2 adjustable clamps Ø 40 mm and 3 boss heads

25-0001

Electronic Energy Regulator

Consisting of:
Potentiometer on/off switch, 10 A overload fuse;
DIN-socket, 1,5 m connecting cable with DIN-plug.

Technical Data:
Capacity: up to 2000 W
Weight of thermoplastic casing: 500 g
Dimension (L x W x H): 150 x 80 x 55 mm
Power supply: 230 V, 50/60 Hz, 2000 W

25-0108

Electronic Energy Regulator

Like 25-0001 but:
Power supply: 115 V, 60 Hz

16-0863

Erlenmeyer-Flask, 500 ml (NS 45/40)

(DIN 12 387), borosilicate glass

16-0870

Round flask, 500 ml (NS 45/40)

(DIN 12 348) with standard taper

16-0705

Measuring Cylinder (500 : 5 ml)

borosilicate glass with plastic stand, ID 49 mm x H 342 mm

16-0742

Mixing Cylinder (500 : 5 ml)

borosilicate glass, with plastic stand and stopper

16-0886

Trap (10 : 0.1 ml) (NS29/32)

End of the measuring tube: conical
0-point ends: at tip

16-0887

Trap (10 : 0.1 ml) (NS29/32)

End of the measuring tube: round
0-point ends: above bottom

16-0888

Trap (10 : 0.1 ml) (NS29/32)

End of the measuring tube: with cock
0-point ends: above cock

16-0889

Trap (10 : 0.1 ml) (NS29/32)

End of the measuring tube: with cock
0-point ends: at cock

16-0879

Liebig Reflux Condenser, 400 mm (NS 29/32)

with special drip tip for easy counting of drops

11-0139

Support Board, center hole Ø 70 mm (2¾")

glass ceramics (150 x 150 x 4 mm)

11-0018

Heater Rod 200 W, 115-230 V

11-0019

Heating Element with 4 heater rods

Power supply: 230 V, 50/60 Hz, 800 W

25-0004

Control Module "m2" to regulate the heating power

Power supply: 230 V, 50/60 Hz

Minimum equipment:

1x Water Determination Apparatus

Spares (approx. 1 year):

Flask, Cylinder, Trap, Thermometer

Additional requirements: