18-2220

Test Kit "Needle - ASTM"

ASTM D 5 - AASHTO T49 - JIS K2207

Suitable for: bituminous materials, chocolate, compact powder, lipstick, soap, yeast

Consisting of:
3 standard needles, 2.5 g, brass/steel, precision made (18-1160)
1 plunger 47.5 g (18-0042)
1 load weight 50 g (18-0051)
5 sample jars I, Ø 55 x 35 mm (18-0066)
1 tempering bath (18-0065)
1 petri dish, Ø 43 x 11 mm (13-0514)

18-2221

Test Kit "Needle - EN"

EN 1426 (IP 49 obs.)

Suitable for: bituminous materials, chocolate, compact powder, lipstick, soap, yeast

Consisting of:
3 standard needles 2.5 g, brass/steel, precision made (18-1160)
1 plunger 47.5 g (18-0042)
1 load weight 50 g (18-0051)
5 sample jars I, Ø 55 x 35 mm (18-0066)
1 sample jar III, Ø 70 x 45 mm (18-0068)
1 sample jar V, Ø 55 x 60 mm (18-0069)
1 reduction ring Ø 36 / 53 x 20 mm (18-0076)
1 reduction ring Ø 36 / 53 x 30 mm (18-0077)
1 tempering bath with serpentine heat exchanger tube (18-0070)
1 intermediate bottom (18-0091)
1 thermometer holder (18-0094)
1 thermometer ASTM 63C (90-0106)
1 thermometer ASTM 64C (90-0107)

Note! for standard acc. to IP 49 obs. is required:
150g load weights (18-0052 & 18-0056) and
thermometer ASTM 17C (21-0601).

18-2222

Test Kit "Needle - manually <350 PU"

ASTM D 5 (<350 PU) - EN 1426 (<330 PU)

Suitable for: Bitumen
with an expected immersion depth of less than 35 mm

Consisting of:
3 standard needles 2.5 g, brass/steel, precision made (18-1160)
1 plunger 97.5 g (18-0050)
3 sample jars I, Ø 55 x 35 mm (18-0066)
1 sample jar III, Ø 70 x 45 mm (18-0068)
1 tempering bath (Ø 160 x 80 mm)
    with serpentine heat exchanger tube (18-0070)
1 intermediate bottom (18-0091)
1 thermometer holder (18-0094)
1 thermometer ASTM 63C (90-0106)

Note! for manual surface detection with PNR 12

18-2223

Test Kit "Needle - automatic <160 PU"

ASTM D 5 (<160 PU) - EN 1426 (<160 PU)

Suitable for: Bitumen
with an expected immersion depth of less than 16 mm
after 5 seconds with 100 g weight

Consisting of:
3 standard needles 2.5 g, brass/steel, precision made (18-1160)
1 sensor plunger 97.5 g (18-1136)
3 sample jars I, Ø 55 x 35 mm (18-0066)
1 tempering bath (Ø 160 x 80 mm)
    with serpentine heat exchanger tube (18-0070)
1 intermediate bottom (18-0091)
1 thermometer holder (18-0094)
1 temperature sensor PT-100 (18-1149)

Note! for automatic surface detection with PNR 12 only!

18-2224

Test Kit "Needle - manually >330 PU"

ASTM D 5 (>350 PU) - EN 1426 (>330 PU)

Suitable for: Bitumen
with an expected immersion depth of more than 33 mm

Consisting of:
3 long standard needles 2.5 g, brass/steel, precision, (18-9994)
1 plunger 97.5 g (18-0050)
3 sample jars I, Ø 55 x 70 mm (18-0075)
1 tempering bath (Ø 160 x 80 mm)
    with serpentine heat exchanger tube (18-0070)
1 intermediate bottom (18-0091)
1 thermometer holder (18-0094)
1 thermometer ASTM 63C (90-0106)

Note! for manual surface detection with PNR 12

18-2225

Test Kit "Needle - automatic <160 PU modified"

ASTM D 5 (<160 PU)

Suitable for: modified Bitumen
with an expected immersion depth of less than 16 mm
after 60 seconds with 200 g weight

Consisting of:
3 standard needles 2.5 g, brass/steel, precision made (18-1160)
1 sensor plunger 97.5 g (18-1136)
1 load weight, 100 g (18-1201)
3 sample jars I, Ø 55 x 35 mm (18-0066)
1 tempering bath (Ø 160 x 80 mm) (18-0065)
1 intermediate bottom (18-0091)
1 thermometer holder (18-0094)
1 temperature sensor PT-100 (18-1149)

Note! for automatic surface detection with PNR 12 only!

18-2230

Test Kit "Tapered Needle"

ASTM D 1321 - DIN 51 579 - IP 376

Suitable for: petroleum waxes, parrafins, yeast,
sausages & meat products, marzipan, chocolate

Consisting of:
2 tapered needles 2.5 g, brass/steel (18-0081)
1 plunger 47.5 g (18-0042)
1 load weight 50 g (18-0051)
3 wax test cylinders (18-0078)
3 base plates, glass (18-0085)
1 tempering bath, glass (18-0170)
1 thermometer ASTM 64C (21-0653)

18-2321

Test Kit "Pin Needle - Brass"

Suitable for: putty & fruit, viscous pastes, cheese

Consisting of:
3 pin needles 3 g, brass (18-0221)
1 plunger 15 g (18-0044)
1 load weight 2 g (18-0053)

18-2322

Test Kit "Pin Needle - Steel"

Suitable for: putty & fruit, viscous pastes, cheese

Consisting of:
3 pin needles 3 g, stainless steel (18-0222)
1 plunger 15 g (18-0044)
1 load weight 2 g (18-0053)

18-2273

Test Kit " Needle & Cone - VICAT"

ISO 6873

Suitable for: plaster, gypsum

Consisting of:
2 VICAT needles 2 g, stainless steel (18-0279)
1 VICAT cone 85 g, aluminum (18-0280)
1 plunger 98 g (18-0043)
1 plunger 15 g (18-0044)
2 load weights 100 g (18-0052)
2 plaster / gypsum molds (18-0281)
2 glass base plates 120 x 120 x 6 mm (10-0057)

18-2360

Test Kit "Solid Cone - AOSC"

AOSC Cc 16-60

Suitable for: edible fats, butter, margarine, solid emulsions,
confectionery & candy

Consisting of:
1 cone 20°, 45 g, aluminum (18-0171)
1 plunger 47.5 g (18-0042)

18-2175

Test Kit "Solid Cone - UNILEVER"

Suitable for: Edible fats, butter, margarine, solid emulsions, confectionery and candy

Consisting of:
1 cone 40°, 31.5 g, aluminum (18-0176)
1 plunger 48.5 g (18-0177)
1 load weight 80 g (18-0178)

18-2311

Test Kit "Standard Solid Cone"

ASTM D 217 - IP 50 - ISO 2137 - NF T60-132

Suitable for: semi-liquid lubricating greases, jam & marmelade, ketchup, mustard, paints & varnishes, printing inks, fruit preparations

Consisting of:
1 standard solid cone 102.5 g, electron (Al)/steel (18-0112)
1 plunger 47.5 g (18-0042)
1 grease sample jar Ø 76.5 x 63.5 mm, brass (18-0103)

18-2361

Test Kit "Hollow Cone - Plexiglas"

Suitable for: cured-based foodstuff, yoghurt, cream,
paints and varnishes

Consisting of:
1 hollow cone 15 g, plexiglas/aluminum (18-0122)
1 plunger 10 g (18-0045)

18-2260

Test Kit "Optional Hollow Cone - Grease"

ASTM D 217 - ASTM D 937 - ASTM D 7342 - DAB 10-V.5.8.1 -
IP 50 - IP 179 - ISO 2137 - NF T60-132

Suitable for: vaselines, paraffines (penetration over 150), edible fats, pudding, jelly, face & skin cream, pastes, emulsions, paints, putty fillers, yogurt curds, substances similar to lubricants, mayonnaise

Consisting of:
1 optional hollow cone 102.5 g, brass/steel (18-0101)
1 plunger 47.5 g (18-0042)
1 grease sample jar Ø 76.5 x 63.5 mm, brass (18-0103)

18-2252

Test Kit "Optional Hollow Cone - Wax"

DIN 51 580

Suitable for: vaselines, paraffines (penetration over 150), edible fats, pudding, jelly, face & skin cream, pastes, emulsions, paints, putty fillers, yogurt curds, substances similar to lubricants, mayonnaise

Consisting of:
1 optional hollow cone, 102.5 g, brass/steel (18-0101)
1 plunger 47.5 g (18-0042)
3 wax test cylinders with glass base plate, Ø 50 x 40 mm (18-0089)
1 tempering bath (18-0065)

18-2251

Test Kit "Optional Hollow Cone - Vaseline"

ASTM D 937 - IP 179

Suitable for: vaselines, paraffines (penetration over 150), edible fats, pudding, jelly, face & skin cream, pastes, emulsions, paints, putty fillers, yogurt curds, substances similar to lubricants, mayonnaise

Consisting of:
1 optional hollow cone 102.5 g, brass/steel (18-0101)
1 plunger 47.5 g (18-0042)
1 Vaseline sample jar Ø 100 x 65 mm (18-0104)

18-2215

Test Kit "Optional Hollow Cone - Filler"

ASTM D 5329 - EN 13 880-2

Suitable for: Sealant, Fillers

Consisting of:
1 optional hollow cone 102.5 g, brass/steel (18-0101)
1 plunger 47.5 g (18-0042)
1 sample jar I, Ø 55 x 35 mm (18-0066)
1 tempering bath (18-0065)
1 spacer plate for tempering bath (18-0091)

18-2280

Test Kit "Standard Half-Cone - SHELL"

ASTM D 1403 - IP 310 - SHELL SMS 658

Suitable for: small amounts of fats, greases or lubricating grease,
ball bearing greases

Consisting of:
1 SHELL half cone 22.5 g, brass/steel (18-0141)
1 plunger 15 g (18-0044)
5 sample jars (18-0142)

18-2270

Test Kit "Quarter Cone - Plexiglas"

ASTM D 1403 - IP 310 - ISO 2137 - NF T60-132

Suitable for: small amounts of fats, greases or lubricating grease,
ball bearing greases

Consisting of:
1 one-quarter cone 1.08 g, plexiglas with steel tip (18-0131)
1 plunger 8.3 g (18-0132)
1 grease sample jar with cover (18-0133)

18-2290

Test Kit "Micro-Cone - ASTM"

Suitable for: substances similar to lubricating grease,
solid or semi-liquid cosmetic cream

Consisting of:
1 micro-cone 5 g, aluminum (18-0151)
1 plunger 15 g (18-0044)
1 three-section grease collection jar (18-0153)

18-2300

Test Kit "Micro-Cone - KLEIN"

DAB 10-V.5.8.1

Suitable for: substances similar to lubricating grease,
solid or semi-liquid cosmetic cream

Consisting of:
1 KLEIN micro-cone 7 g, aluminum (18-0161)
1 plunger 16.8 g (18-0162)
1 three-section grease collection jar (18-0153)
1 centering disk (18-0155)

18-2330

Test Kit "Cylinder with Tip"

Suitable for: soft pastes, toothpaste, printing inks

Consisting of:
1 cylinder with tip, aluminum (18-0231 and 18-0232)
1 plunger 15 g (18-0044)

18-0260

Test Kit "Rod - Hollow"

Suitable for:
semi-liqiud fats, greases & pastes, emulsions, honey, paints & varnishes, potting compounds, ceramic pastes

Consisting of:
1 hollow rod, Ø 10 mm, 90°, 7 g, aluminum
3 interchangeable weights ( 3, 13 and 23 g)

18-2370

Test Kit "Ram - Bitumen Number" (van der Baan)

EN 13 179-2

Suitable for: bitumen

Consisting of:
1 ram Ø 8 mm, 15 g, aluminum (18-0251)
1 sample jar Ø 30 mm x 30 mm (18-0252)

18-2271

Test Kit "Ram - Cement"

Suitable for: cement etc. (curing time, setting time)

Consisting of:
1 ram Ø 3 mm, 4.3 g, stainless steel (18-0271)
1 plunger 47.5 g (18-0042)

18-2390

Test Kit "Ram - Rubber"

Suitable for: silicone rubber

Consisting of:
1 ram Ø 6.3 mm, 6.4 g, stainless steel (18-0272)
1 plunger 47.5 g (18-0042)

18-2213

Test Kit "Ball - Filler" (for PNR 10 only)

ASTM D 5329 - EN 13 880-3 - BS 2499-3

Suitable for: sealant, fillers

Consisting of:
1 ball rod, Ø 17mm, 27.5 g, stainless steel (18-2355)
1 plunger, 37.5 g (18-0038)
2 sample jars III, Ø 70 x 45 mm (18-0068)
2 beakers, 600 ml (10-0056)

18-2214

Test Kit "Ball - Filler" (for manual PNR)

ASTM D 5329 - EN 13 880-3

Suitable for: sealant, fillers

Consisting of:
1 ball Ø 17 mm, 27.5 g, stainless steel (18-2355)
1 plunger 47.5 g (18-0042)
2 sample jars III, Ø 70 x 45 mm (18-0068)
2 beakers, 600 ml (10-0056)

18-2350

Test Kit "Flat Ram - Bread"

acc. American Institute of Baking Method

Suitable for: bread (softness, crumb strenght)

Consisting of:
1 ram 67 g, aluminum (18-0241)
1 plunger 98 g (18-0043)
1 load weight for overall load of 215 g (18-0051)

18-2351

Test Kit "Round Ram - Bread"

acc. Deuroback Method

Suitable for: bread (softness, crumb strenght)

Consisting of:
1 cap 50 g, stainless steel (18-0243)
1 plunger 10g (18-0045)
2 load weights 20 g (18-0056)

18-1560

Test Kit "Butter" (for PNR 21 only)

DIN 10 331

Suitable for: edible fats, butter, margarine, solid emulsions,
confectionery & candy

Consisting of:
1 fork with re-adjustable, cutting wire (18-1561)
5 frames (25 x 25 mm) to cut out specimen cubes (18-1562)

18-1728

Test Kit "Adhesive Strength" (for PNR 21 only)

Suitable for: paint, glue

To heat-up ram, sample and container to the requested temperature without getting in contact with the tempering fluid.

Consisting of:
1 adhesion ram set (18-1729)
   (includes 1 plunger, 1 ram Ø 3 mm, 1 ram Ø 10 mm,
   1 tempering hood)
1 tempering plate (18-1730)
3 sample jars, Ø 15 x 0.4 mm (18-1731)

Note! Requires a circulation thermostat (not included).

18-2341

Test Kit "Perforated Disk - Cylindrical Holes 10g"

Suitable for: viscous substances, paints and varnishes, glue, jam, puddings, gelatine, mustard

Consisting of:
1 perforated disk Ø 39 mm, 10 g, aluminum (18-0211)
1 plunger 10 g (18-0045)
5 sample jars III (18-0068)

18-2342

Test Kit "Perforated Disk - Cylindrical Holes 28g"

Suitable for: viscous substances, paints and varnishes, glue, jam, puddings, gelatine, mustard

Consisting of:
1 perforated disk Ø 39 mm, 28 g, aluminum (18-0212)
1 plunger 10 g (18-0045)
5 sample jars III (18-0068)

18-2310

Test Kit "Perforated Disk - ASTM"

Suitable for: semi-liquid lubricating greases, jam & marmelade, ketchup, mustard, paints & varnishes, printing inks, fruit preparations

Consisting of:
1 perforated disk Ø 70 mm, 102.5 g, aluminum (18-0201)
1 plunger 47.5 g (18-0042)
1 grease sample jar (18-0103)

18-2380

Test Kit "Perforated Disk - Conical Holes"

Suitable for: mayonaise, mustard, semi-liquid fats and greases,
rubber solutions

Consisting of:
1 perforated disk Ø 35 mm, 19.5 g, aluminum (18-0254)
1 plunger 15 g (18-0044)
1 set of load weights, 5, 10 and 20 g (18-0054 / 55 / 56)

18-1161

Standard Needle, 2.5 g (factory certified)

ASTM D 5 - EN 1426 - JIS K2207 (lP 49 obs.)
and other applications

made of brass / stainless steel

18-1163

Standard Needle, 2.5 g (officially certified)

EN 1426 (lP 49 obs.)

made of brass / stainless steel

18-1164

Standard Needle, 2.5 g (officially certified)

ASTM D 5 (suitable for EN 1426 and lP 49 obs.)

made of brass / stainless steel

18-0261

Test Rod, Ø 10 mm, 10 g, plexiglas

18-0270

Test Cutter, 130 g, stainless steel

Minimum equipment:

Test Kits (depending on application)

Spares (approx. 1 year):

Additional requirements: