16-1470

Foam-Tester - Twin Bath Arrangement

ASTM D 892 (sequence I, II, III) - IP 146 - ISO 6247 -
JIS K2518 - ASTM D 6082 (sequence IV)

Four test places in each of the two baths.

Consisting of:
2 full-view tempering baths
4 graduated test cylinders, 1000 ml
2 PTFE-tapered stoppers (16-1481) with nipple for
   not-included quick-coupling
2 diffusor sets with cylindrical diffuser
2 flow meters, single unit, 0.4 ... 7 l/h
2 thermometers ASTM 12C (13-0715)

Note!
Each bath to be maintained individually at 24, 49, 93.5 and 150 °C or other temperatures within this range.

Power supply: 230 V, 50/60 Hz

16-1471

Foam-Tester - Twin Bath Arrangement

Like 16-1470 but:
Power supply: 115 V, 50/60 Hz

16-1472

Foam Tester - Single Bath Arrangement

ASTM D 892 (sequence I, II, III) - IP 146 - ISO 6247 -
JIS K2518 - ASTM D 6082 (sequence IV)

Consisting of:
1 borosilicate jar 20 l, bath insert with lids for the openings in the cover plate which will accommodate up to 4 test cylinders and the cooling probe of an external coolant circulator; clamping springs and guides for the test cylinders, hose guides and holder for a thermometer.

Thermostatic bath:
Consisting of:
a high-performance, digitally-indicating circulation-thermostat module, cooling coil, temperature probe and self-optimizing electronic heating control.

Supplied with:
4 lids
1 leakage protection vessel
1 temperature insulation

Note!
Each bath to be maintained individually at 24, 49, 93.5 and 150 °C or other temperatures within this range.

Power supply: 230 V, 50/60 Hz

16-1473

Foam Tester - Single Bath Arrangement

Like 16-1472 but:
Power supply: 115 V, 50/60 Hz

16-1480

Test Cylinder, 1000 ml, graduated

16-1481

Stopper, PTFE (45/40)

13-0715

Thermometer ASTM 12C / IP 64C

Range: -20 to +102 : 0.2 °C
Length: 420 mm, Immersion: total, Ø 7 mm

16-1345

Flow Meter Unit, 0.4 ... 7 l/h

Consisting of:
1-place bench, needle valve, special tripod base with adjusting screws and level indicator, includes 1 meter of connection hose, 1 T-tube and 2 angle bends.

16-1490

Diffusor Set (cylindrical-shape)

Consisting of:
air-inlet tube, quick coupling, 10 PTFE-gaskets, 2 m silicon hose and cylindrical-shaped diffusor

16-1491

Diffusor Set (ball-shape)

Consisting of:
air-inlet tube, quick coupling, 10 PTFE-gaskets, 2 m silicon hose and ball-shaped diffusor

16-2495

Centering-Disk for Diffusor

16-1702

Air Drying Tower (Ø 45 mm x 315 mm high)

needs to be filled with desiccant, indicating desiccant and
cotton layers

16-0572

Thermometer Holder

25-0489

Vacuum-Pump with Mini-Compressor & Accessories

Consisting of:
1 oil-free diaphragm pump with filter,
1 hose (Ø 6 mm x 1 m, silicon, clear),
1 T-piece connection (Ø 7.5 mm)
1 Hoffmann-Clip

Technical Data:
Max. capacity: 11.5 l/min
End vacuum: 240 mbar
Operating pressure: 2 bar (overpressure)
Dimensions / Weight: 9 x 20 x 13 cm (WxDxH), 2.2 kg

Power supply: 220/230 V, 50 Hz, EU-plug

25-0490

Vacuum-Pump with Mini-Compressor & Accessories

Like 25-0489 but:
Power supply: 110/115 V, 60 Hz, US-plug

13-0061

Fine Control Valve with hose nipples

20-0030

Luminous Background

Large field lamp (25 x 25 cm) for convenient glare-free observation in a transparent thermostatic bath.

Dimensions: (WxHxD) 250 x 350 x 140 mm, 3.5 kg
Power supply: 220/250 V, 50/60 Hz, 22 W

20-0040

Luminous Background

Like 20-0030 but:
Power supply: 115 V, 50/60 Hz

21-0697

Digital Stop Watch

Consisting of:
7-digit LC display, max. 10 hours countdown with 1/100 sec. precision, Lithium battery
• quartz-controlled
• water resistant
• memory function
• calendar

16-1479

Cylinder Stand with drip tray for 8 test cylinders

16-1700

ASTM D 6082 Sequence-IV Test Set

for foaming test up to 150 °C

Consisting of:
3 thermometers ASTM 41C
2 thermometer holders
2 flow meters, 1.6 ...16 l/h

16-1680

Diffusor Stone Test Set

ASTM D 892 - ASTM D 1881 - ADTM D 6082 - IP 146

to check the max. pore diameter & permeability

Consisting of:
gas-volume meter, 6-360 l/h
U-tube manometer, 500-0-500
needle valve
receiver, 250 ml
vacuum flask, 500 ml with bored stopper
hose of 1 m and 2 m length
T-connector, 1 each

16-1497

Air Volume Test Set

ASTM D 892 - ASTM D 6082 - IP 146

to check the total air-flow rate

Consisting of:
air volume meter, 1-60 l/h
air cooling coil
hose length with fork clamp

16-2497

Gas Volume Test Set "Economy"

ASTM D 892

Consisting of:
1 stand flask
1 gas measure glas, 1 liter
1 connecting tubing with coupling
1 cooling coil
1 clamp and adapter

16-1486

Quick Coupling

easy mains of air-volume meter hose with tapered stopper

16-1693

Upgrading Outfit

to use all 8 test places of the Quadruple Twin Foam-Tester

Consisting of:
4 graduated test cylinders, 1000 ml
2 bored stoppers
2 diffusor sets, cylindrical type

25-1206

Circulation Cooler (+5/+40)

For cooling of instruments without circulation pump (external tempering).
Economical solution for cooling without tap water.

Consisting of:
Cooler with tank and integrated pump.

Note: Insulated hose-set (25-0228) is recommended

Technical Data:
Working range: +5 to +40 °C (at +5 to +40 °C ambient temp.)
Display / Resolution: LED / 0.1°C
Cooling capacity: 250 W at +20 °C
Pump-Pressure capacity: 15 l/min, 0.35 bar (5.1 psi)
Volume: 1.7-2.6 l
Sockets for: hose (Ø 8 / 10 mm)
Dimensions / Weight: 24 x 40 x 52 cm (WxDxH), 27 kg
Power supply: 230 V, 50 Hz, 2 A, EU-plug

25-1208

Circulation Cooler (+5/+40)

Like 25-1206 but:
Power supply: 115 V, 60 Hz

25-0515

Bath Cooling Coil

16-1498

Pre-Tempering Bath

Consisting of:
20l bath, 2 test cylinders, 1 thermometer ASTM 12C

Power supply: 230 V, 50/60 Hz

16-1499

Pre-Tempering Bath

Like 16-1498 but:
Power supply: 115 V, 50/60 Hz

13-0715

Thermometer ASTM 12C / IP 64C

Range: -20 to +102 : 0.2 °C
Length: 420 mm, Immersion: total, Ø 7 mm

16-1480

Test Cylinder, 1000 ml, graduated

16-1481

Stopper, PTFE (45/40)

16-1485

Quick Coupling for air-inlet tube

16-0669

Gaskets for the diffusor, pack of 10

16-1482

Gas Diffusor, cylindrical shape

BSF 3/16"-thread, with works-certificate and laser-engraved identification-number, sintered metal

16-1483

Gas Diffusor, ball shape

BSF 3/16"-thread, with works-certificate and laser-engraved identification-number, alundum stone, spherical 1"

Minimum equipment:

1x 16-1470 or 1x 16-1472, 1x 16-1702, 1x 25-0489

Spares (approx. 1 year):

16-1480, Diffusor Stone, Thermometer

Additional requirements: