16-0352

Cloud & Pour Point Arrangement - CAPP 1

ASTM D 97 - ASTM D 2500 - ASTM D 5853 - ISO 3015 -
ISO 3016 - EN 23015 - FTM 791-0201 - IP 15 - IP 219 -
IP 441 - JIS K2269 - JIS K2601 - NF T60-105
(BS 4458, DIN 51597 obs.)

1-place model with circulation coil for external cooling

Consisting of:
4 liter dewar cooling bath with cover, which is equipped with an opening for one air jacket, a stopper and a borehole for thermometer.

Supplied with:
  1 test jar
10 spacer rings
  1 insulating plate
  1 air jacket
  2 thermometer (ASTM 5C and ASTM 6C)

Dimensions (BxDxH): 20 x 20 x 31 cm, approx. 5 kg

20-0117

Acrylic Leakage Protection Vessel (15 l)

for 4 liter dewar cooling bath (This cover protects in case of implosion, glass breakage and leakage)
Dimensions (outside): Ø 24 x 34 cm

21-0697

Digital Stop Watch

Consisting of:
7-digit LC display, max. 10 hours countdown with 1/100 sec. precision, Lithium battery
• quartz-controlled
• water resistant
• memory function
• calendar

13-0701

Low Pressure Vessel

ASTM D 130 - ISO 2160 (Copper Strip) & ASTM D 4814 (Silver Strip)
ASTM D 5853 (Cloud & Pour Point)

stainless steel, with screw cap and gasket,
for pressure tests up to 7 bar (100 psi)

13-0705

Liquid Bath for 1-6 vessels

ASTM D 130 - IP 154 - DIN 51 759 (Copper Strip)
ASTM D 5853 (Cloud & Pour Point)

Consisting of:
bath made of stainless steel, with infinitely variable heating control, low level and excess temperature protection and standard accessories.

Supplied with:
sealing cover for all 7 bath-openings, stopper for thermometer and thermometer (0 to +125 : 1°C)

Power supply: 230 V, 50/60 Hz

13-0710

O-Ring Seals for pressure vessels, set of 10

16-0372

Thermometer ASTM 5C / IP 1C

Range: -38 to +50 : 1 °C (officially certified)

16-0376

Thermometer ASTM 6C / IP 2C

Range: -80 to +20 : 1 °C (officially certified)

17-0042

Thermometer ASTM 61C / IP 63C

Range: +32 to +127 : 0.2 °C
Length: 303 mm, Immersion: total, Ø 6.5 mm

17-0043

Thermometer ASTM 61C / IP 63C

Range: +32 to +127 : 0.2 °C (officially certified)

16-0364

Air Jacket, made of glass

16-0371

Thermometer ASTM 5C / IP 1C

Range: -38 to +50 : 1 °C
Length: 230 mm, Immersion: 108 mm, Ø 7 mm

16-0375

Thermometer ASTM 6C / IP 2C

Range: -80 to +20 : 1 °C
Length: 230 mm, Immersion: 76 mm, Ø 7 mm

16-0222

Sample Container for routine tests

inside Ø 31 x 118 mm, mark at 54 mm, pack of 10

16-0361

Test Jar, flat bottomed glass

with filling mark, Ø 34 x 120 mm

16-0363

Insulating Plate, made of laminated fabric

fitting into air jacket, outside Ø 34 x 120 mm

16-0365

Air Jacket, made of nickel-plated brass

16-0367

Spacer Rings, set of 10

for CFPP-units made until 1/2002

16-0385

Stopper, NBR-rubber (30/35 / bored Ø 7 mm)

Minimum equipment:

1x 16-0352, 1x 20-0117

Spares (approx. 1 year):

Thermometer, 1x 16-0222, 1x 16-0385

Additional requirements: